Newskill ATON Manual Del Usuario página 9

HOW TO CONNECT ATON
WIRELESS CONNECTION 2.4Ghz low latency
1
Connect to your PC, Mac, PlayStation 5 or 4 with 2.4Ghz wireless
technology: Insert the receiver into the USB port of your device
2
Press the power button for a minimum
of 2.5 seconds
4
The BLUE LED will start blinking until
it is not paired
2.5 sec.
3
Make sure the connection selection
switch is set to Red
5
Once paired with the receiver the LED
will remain Fixed in blue tone
ENGLISH
Red
9