KIKKA BOO AMARIS Instrucciones De Uso página 11

IMPORTANT! KEEP FOR FUTURE REFERENCE!
READ CAREFULLY!
which are rounded or with water beds.
THE TYPE ADULT BEDS WITH WHICH THE BEDSIDE SLEEPER CAN OR CAN NOT BE USED
WARNING!
The attachment system must ALWAYS be used in bedside sleeper mode:
5.4. Align the crib directly next to the parent bed and pass the Attachment System underneath the mattress of the bed and around the bed frame.
5.5. Secure the Attachment System by connecting and pass the clip buckles together. Pull strap to tighten the Attachment System securely to the bed.
5.6. Mattress , Box springs & Frame aligned; Acceptable adult bed conditions for co sleeping mode (bed frame in-line).
5.7. Unacceptable adult bed conditions for co sleeping mode (bed frame not in-line).
Not suitable for use next to water beds or children's beds.
•
Let the bedside crib toward to adult's bed.
•
Connect the bedside crib and adult's bed with strap, the strap have to place between mattress and frame of adult's bed.
WARNING!
When using the bedside bed function, the drop side rail that must be removed and kept well.
WARNING!
When fixing the bedside bed, the short guardrail edge must be closely fitted with the adult mattress to avoid any gap. The bedside sleeper can be used for
aligned adult bed only. Meanwhile the distance from the lowest bottom side of the aligned adult bed(the drop side) to the ground should be more than 20cm.
5.2 Make sure the foot reach the bed side board.
5.3 Not suitable for use next to water beds or children's beds.
BEDSIDE SLEEPER FUNCTION
5.1-5.3 To use the product as a bedside sleeper, it needs to be converted. The procedure:
1. Undo the zippers on both ends of the folding side .
2. Slide the locks to release the railing retainer.
3. Lower the folding side of the carrycot.
4. Put the crib to the side of the adult's bed and set the crib's height so that the top of the bed's mattress is level with - or no more than 2 cm above - the top edge of
the folding side.
5. Pass the crib's mounting straps under the bed's mattress and hook the ends over the adult's bed frame on the opposite side of the bed. The ends must be upright
between the bed frame and the mattress.
6. Secure the mounting straps to the crib using the clasps..
7. Tighten the mounting straps and make sure this keeps the crib stable and
firmly attached to the adult's bed.
VI. HOW TO USE THE BRAKE
6.1. To lock the crib wheels, press down the brake tabs on each of the wheels.
6.2. To release the wheels, lift the brake tabs.
VII. CLEANING AND MAINTENANCE
•
Clean the metal and plastic parts with a damp cloth and a mild detergent.
•
To clean use soapy water or soft cleaning detergent. Handwash the bag with soapy water. Do not iron. Do not bleach.
•
DO NOT place the cot near heating devices because it will damage the plastic and fabrics.
•
DO NOT use crib if any parts are missing, damaged or broken. Please, contact our distributors. DО NOT substitute parts.
Materials used: Plastic, textile, metal
PRODUCED FOR KIKA GROUP LTD., VASIL LEVSKI 121, PLOVDIV, BULGARIA. MADE IN CHINA.
COMPLIES WITH EN 1130:2019+AC:2020; EN 16890:2017+А1:2021
ENGLISH