Publicidad
Idiomas disponibles
Idiomas disponibles
A. Install your wine cellar into the kitchen cabinet, having first checked that the dimensions
correspond exactly to those indicated on the installation drawing.
B. Once your wine cellar properly positioned into the kitchen cabinet, please adjust it as close as
possible to the edges of the kitchen cabinet. Make sure that your appliance is flushed
with the kitchen cabinet in order to ensure a functional push-pull opening system.
C. Once black mounting bars are installed as close as possible to the edges of the kitchen cabinet,
test the push-pull system to open and close the door. Once the test is successful, please screw
the upper fixing bar and the lower one (2 screws at the top / 2 screws at the bottom) in order to
correctly install your wine cellar.
Improper installation of your appliance will not allow the push-pull system to
function properly to open or close the door. Make sure to follow the instructions
above.
Opening push-pull system
Press twice in succession in the opening area at the upper left zone. Be careful not to leave
more than one second between the two pressing. This is normal that there is a delay
between touching your wine cellar and the moment the door opens.
Moreover, the system is electronic; it does not require any adjustment on your side.
Before closing the door carefully,
to its original position
5. OPERATING INSTRUCTIONS
It is recommended that you installed your appliance in a place where the ambient temperature is between
10-38°C. If the ambient temperature is above or below recommended temperatures, the performance of the
unit may be affected and it may not be possible to obtain temperature between 5-12°C/12-20°C.
please wait for the opening system to return
. Forcing when closing
may damage
the push-pull system.
44
Publicidad
