Earphones LED indicators
The earphones LED indicator informs about the state of the
connection, among other aspects:
Pairing
Connected
Power on
Power off
Charging
Turn on/off the earphones
The earphones turn on automatically when taken out of the
charging case. To turn them off automatically, place the
earphones into the charging case. Once they are in the
charging case, they will start to charge automatically.
To turn them on manually, tap on both earphones for 3
seconds, you will then hear the word "Power on". To turn
them off manually, long tap on both earphones.
How to pair the earphones
Take the earphones out of the charging chase to activate the
pairing mode automatically.
Activate the Bluetooth on your device, search for KSIX NC3
on the available Bluetooth devices list and select it. Once the
connection has been successful, you will hear the word
"Connected". Once the earphones have been connected to
a device, they will pair with it automatically when taken out
of the charging case.
Troubleshooting: If the earphones do not turn on
automatically, it should be due to low battery. Please, charge
the earphones and the charging case. If only one earphone
is working, it should be due to a connection failure. Please,
reset the earphones as instructed later on in this manual.
Usage method
Use the touch control to make use of all the functions of the
device:
Play/Pause
Previous/Next
song
Volume -/+
Answer/Hang
up calls
Reject calls
A blue light will flash every 2
seconds until the earphones are
paired.
No light will show.
A blue light will flash quickly
until the earphones are paired.
A blue light will flash 3 times.
A blue light will flash quickly
while charging.
Tap the left or right earphone
twice.
To play the previous song, tap the
left earphone 3 times.
To play the next song, tap the
right earphone 3 times.
To decrease the volume, tap the
left earphone once.
To increase the volume, tap the
right earphone once.
To answer an incoming call, tap
the left or right earphone twice.
To hang up, do the same.
To reject an incoming call, long
tap the left or right earphone
during 2 seconds.