Switch instruction
(6)
On/Off
Speed
Light
Timer ( delay-off )
(7) MAINTENANCE
The cleaning of the grease filter
Please do not use the corrosive detergent on grease filters. Keeping this filter clean will keep the appliance
running correctly. Please strictly follow the guidelines below.
Method 1: Put the mesh into 40-50 c clean water, pour on detergent, and soak for 2-3 minutes. Wear gloves and
clean with a soft brush. Please do not apply too much pressure, as the mesh is delicate and will damage easy.
Method 2: If instructed to do so, it can be put into a dishwasher, set the temperature at around 60 degrees.
Notice of cleaning cooker hood
O. Disconnect the power cord from the wall outlet before cleaning
P.
To protect the main body from corrosion over a long period of time, the cooker hood should be cleaned
with hot water plus non corrosive detergent every two months.
Q. Please do not use abrasive detergent for it will damage the body.
R. Keep the motor and other spare parts free from water, as this will cause damage to the appliance.
S.
The carbon filter shouldn't be exposed to heat.
T.
Please don't tear open the fixed bar around the carbon filter
U. If the plug or cord is damaged, please replace it with special soft cord.
Press the On/Off button to turn on the cooker hood.The
display lights up and the cooker hood runs at speed 1.
Press the button again to turn off the cooker hood.
1=Low speed
2=Average speed
3=High speed
Press the light button to turn on LED lights,press it
again,the LED lights are off.
Speed 1=5 minutes
delay-off
Speed 2=4 minutes
delay-off
Speed 3=3 minutes
delay-off
27