Philips AUT4030R400 Manual Del Usuario página 12

e. Connect the drain water outlet and the drain connector
Choose a suitable position on the drain pipe to drill a 6.5mm hole. Install the drain
connector according to the diagram. Securely tighten the nuts. Cut a section of 1/4"pipe.
Insert one end of the pipe into the drain outlet hole on the top of the system till the
bottom. Use a clip to secure the pipe at the hole. Insert the other end of the pipe into
the drain connector.
Note:
- Do not install the drain connector onto the same drain pipe as the garbage disposal.
- Do not penetrate opposite side of the pipe when drilling the hole.
9
(1)
(2)
(3)