Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
TO AVOID SERIOUS
INJURY,
BEFORE
PERFORMING
ANY
SERVICE
OR ADJUSTMENTS:
1. Depress
clutch/brake
pedal fully and set parking
brake_
2.
Place gearshift
lever in neutral
(N) position.
3.
Place attachment
clutch
in "DISENGAGED"
position_
4.
Turn ignition
key to "STOP" and remove
key.
5.
Make sure the blades and all moving parts have completely
stopped.
6.
Disconnect
spark plug wire from spark plug and place wire where
it cannot
come in contact
with plug.
TRACTOR
TO REMOVE
MOWER
Mower will be easier to remove from the
right side of tractor,
1.
Place attachment
clutch
in "DISEN-
GAGED"
position.
2.
Move attachment
lift lever forward
to
lower mower to its lowest position°
3.
Roll belt off engine pulley°
4.
Remove
small retainer
spring,
and
remove
clutch spring
off pulley bolt.
5.
Remove
large retainer
spring,
slide
collar off and push housing
guide out
of bracket.
6_ Disconnect
antFsway
bar from chassis
bracket
by removing
retainer
spring.
7.
Disconnect
suspension
arms from rear
deck brackets
by removing
retainer
springs.
8.
Disconnect
front links from deck by
removing
retainer
springs.
9.
Raise lift lever to raise suspension
arms. Slide mower out from under trac-
tor.
Small Retainer S
Clutch S
Small Retainer S
Clutch Spring
IMPORTANT:
If an attachment
other than
the mower
deck is to be mounted
on the
tractor,
remove the front links and hook
the clutch
spring
Into square
hole in frame.
TO INSTALL
MOWER
1.
Raise attachment
lift lever to its highest
position°
2o Slide mower under tractor
with deflec-
tor shield
to right side of tractor.
3.
Lower lift lever to its lowest
position.
4.
Connect
front links to mower deck and
secure
with retainer
springs.
5.
Connect
suspension
arms to rear
deck brackets
and secure with retainer
springs.
6.
Connect
anti-sway
bar to chassis
bracket and secure
with retainer
spring.
7.
Push clutch cable housing
guide into
bracket, slide collar onto guide and
secure
with large retainer
spring.
8.
Place flat washer
and clutch
spring on
idler pulley bolt and secure
with small
retainer
spring°
9.
Install belt onto engine
pulley.
Front Link
Retainer S
Anti-Sway
Housing
Guide --
Retainer Springs
Both Sides)
Deflector Shield
Bracket
Large Retainer Spring
22
Publicidad
