Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH (
Original Instructions)
ACCESSORIES
The performance of any power tool is dependent upon the
accessory used. STANLEY accessories are engineered to
high quality standards and are designed to enhance the
performance of power tool. By using STANLEY accessories
will ensure that you get the very best from your STANLEY
tool. STANLEY offers a large selection of accessories
available at our local dealer or authorized service center
at extracost.
Note: Accessory must be rated for use at speed equal
to or higher than nameplate RPM of tool with which it is
beingused.
Caution! The use of any non-recommended accesories
may be hazardous.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Stnley product
needs replacement, or if it is of no further use
to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
Batteries
This long life battery pack must be recharged
when it fails to produce sufficient power on jobs
which were easily done before.
At the end of its technical life, discard it with due
care for our environment:
f Run the battery pack down completely, then remove it
from the tool.
f Li-Ion cells are recyclable. Take them to your dealer or a
local recycling station. The collected battery packs will
be recycled or disposed of properly.
34
SERVICE INFORMATION
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide customers with
efficient and reliable power tool service. For more information
about our authorized service centers and if you need technical
advice, repair, or genuine factory replacement parts, contact
the STANLEY location nearest you.
TECHNICAL DATA
Li-Ion DRILL/DRIVER
Voltage
V
No-load speed
- 1st gear
min
- 2nd gear
min
Max torque
Nm
Impact
bpm
Power output (NWO)
Chuck capacity
mm
Maximum Capacity
Wood
mm
Metal
mm
Battery
Voltage
V
Capacity
Type
Li-Ion
* Maximum initial battery pack voltage (measured without
a workload) is 12 volts. Nominal voltage is 10,8V.
DESCRIPTION
TYPE
Voltage
Frequency
Hz
Output Currect (DC)
Approx. charge time
min
DESCRIPTION
TYPE
Voltage
Frequency
Output Currect (DC)
Approx. charge time
SCH12
DC
-1
-1
W
DC
Ah
SC121
-AR -B2C -B3 -B2
V
220 220 120 220 127/220
50
50
60
60
A
1.25
70(1.5Ah)
SC122
-AR
-B3
-B2
V
220
120
220 127/220
Hz
50
60
50-60
A
1.25
min
70(1.5Ah)
12V Max*
0-400
0-1500
26
0-22500
180
10
20
10
SCB12S
12V Max
1.5
-BR
60
-BR
60
Publicidad
