Publicidad
Idiomas disponibles
Idiomas disponibles
LED could not display.
LED display error - Lo
Buttons are not functional.
Compressor will not start
Compressor re-start
Dew on the surface of
cabinet：
Liquid sound
Condensation formed inside
the cabinet
Error code E2
Error code CE1
Error code CE2
Error code CE3
Error code CE4
Error code CE5
► If you are unable to solve the problem with the steps shown above, please contact
Customer Service.
Main control board does not work.
PCB Problem. There is some problem with the plug.
Display problem.
PCB problem. Check the service center.
Temperature controller panel is damaged.
Room temperature is lower than desired temperature.
Compressor will stop working when cooling system in the
cabinet reaches
working until the desired temperature is achieved. Allow a
minimum 5 minute interval before re-starting.
The surface of wine cabinet especially the glass door
appear some frost if item in a damp room. This is due to
the moisture in the air coming into contact with the
cabinet. Please wipe it away with dry cloth.
（1）、The sound of compressor when starts or stops
working
（2）、The
refrigeration system
（3）、The evaporating sound of refrigerant in the
evaporator
Under the environment with high level of humidity or the
door of wine cabinet has been left open for a long period
or opened frequently, wipe off the door and walls and
leave the door closed as long as possible.
Desired temperature is not reached.
If necessary defrost the device (Please follow the hints for
manual defrosting in chapter cleaning).
WiFi connection established, but no connection to the
internet
DNS Error – Route to Cloud not found
CASO Cloud Server not reachable
WiFi not found, possible reason signal too weak
Update Server not reachable
Please note
presetting temperature, and re-start
flowing
sound
of
refrigerant
in
the
39
Publicidad
