FeelNeedy YPD-C004 Manual De Uso página 10

Power supply selection
I. Wall outlet
1. Open the silicone waterproof cover at the power port of the master control module,
insert the Type-C connector of the data cable into the power port, insert the other end
into the adapter, and then insert the adapter into the wall outlet. Press the power
button of the master control module, you can start to use it. (The battery can also be
charged. Refer to "power indicator" for charging status.
Wall outlet
Adapter
Type-C cable
* When it is inconvenient to use battery power, please pull out the data cable and close
the waterproof cover.
II. Battery
1. The product has a built-in lithium battery. Press the power button of the master
control module under sufficient power, you can start to use the product.
Type-C cable
* With battery power supply, the
constant mode cannot be used.
06 - EN
Type-C port
Wall outlet
Adapter