Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance and cleaning
I. Daily cleaning and maintenance
1. Disconnect power supply and turn off the product before cleaning; keep the charging
port dry.
2. Take out the filter cotton, filter, filter tray, and rinse them with clean water.
3. Immerse the water container, water tray, filter mesh in water and wash them clean.
4. Do not immerse or wash the master control module, nor clean it in a dishwasher.
5. After cleaning the water container, wipe the charging port clean before connecting
power.
6. It is recommended to change the drinking water every 3 days. Clean the product
before changing water.
II. Replacement of filter and filter cotton
1. In order to keep the pet drinking water clean, it is recommended to clean the product
and filter every 3-4 days, and replace the filter cotton every 7-10 days. Replace the filter
when the filter replacement indicator lights up. Press and hold the power button for 5s,
the filter replacement indicator will flash 3 times then go out, which means the filter is
reset successfully.
2. Before replacing the filter, immerse it in water for 5min, then rinse it with clean water
to remove the floating carbon generated by activated carbon during transportation.
3. For the health of your pets, please change the filter and filter cotton frequently
according to the actual use condition.
III. Cleaning and maintenance of the water pump
1. Open the pump cover.
3. Clean the inside of the water pump and the
impeller with the brush.
4. After cleaning, please check whether there is
water in the charging port, wipe it clean before
powering on the product.
2. Pull out the small round shell and clamp out the
impeller in the water pump with tweezers.
EN - 07
Publicidad
