Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCTSPECIFICATIONS
Motor ....................................................................
4 VoltDC
Switch .....................................................
On-Off/Reversible
No-Load Speed ..................................
200/600/min. ( RPM)
Clutch ..............................................................
24Positions
Torque . ...................................................................
40in.lb.
Collet . ................................................
1/4in.QuickRelease
KNOWYOURSCREWDRIVER
See Figure 1, page L
The safe use of this product requires an understanding
of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempt-
ing. Before use of this product, familiarize yourself with all
operating features and safety rules.
DIRECTION
OF ROTATION
SELECTOR
(FORWARD/REVERSE/CENTER
LOCK}
Your screwdriver has a direction of rotation (forward/
reverse/center
lock) selector located above the switch
trigger for changing the direction of bit rotation. Setting
the direction of rotation selector in the OFF (center lock)
position helps reduce the possibility of accidental starting
when not in use.
QUICK=RELEASE
COLLET
Your screwdriver has a quick-release
collet, which makes
changing 1/4 in. hex shank bits (including 1 in. and 2 in.
driver bits) fast and easy.
TORQUE
ADJUSTMENT
RING
Your screwdriver has a 24-position clutch. The torque
adjustment ring can be turned to select the right amount
of torque for the application.
TWO-SPEED
GEAR TRAIN
The two-speed
gear train is designed for drilling or driving
at low (Position 1) or high (Position 2) speeds. A slide
switch is located on top of your screwdriver for selecting
the speed setting.
LED WORKLIGHT
The screwdriver has a built-in LED worklight that illumi-
nates when the switch trigger is depressed. This feature
is convenient when working in close or tight areas where
additional light is needed.
UNPACKING
This product has been shipped completely assembled.
[] Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing
list are included.
_IL
WARNING:
Do not use this product if it is not
completely assembled or if any parts appear to be
missing or damaged. Use of a product that is not
properly and completely assembled could result in
serious personal injury.
[] Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
[] Do not discard the packing material until you have
carefully inspected and satisfactorily
operated the
product.
[] If any parts are damaged or missing, please call
1-800-932-3188
for assistance.
PACKING
LIST
4 Volt Lithium-Ion Screwdriver
2-Piece Bit Set
Operator's Manual
_
WARNING:
If any parts are damaged or missing
do not operate this product until the parts are re-
placed. Use of this product with damaged or miss-
ing parts could result in serious personal injury.
A
A
WARNING:
Do not attempt to modify this product
or create accessories not recommended
for use
with this product. Any such alteration or modifica-
tion is misuse and could result in a hazardous con-
dition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the product when assembling
parts.
7 - English
Publicidad
