starter solenoid battery (+) terminal. Connection of this terminal is best for optimum performance; however, the alternator will
function without being connected.
Use a #16 gauge red insulated wire, preferably with a 1/4" ID Convoluted Polyethylene Conduit. Also install a standard inline fuse
holder with a protective cap. Use a low voltage automotive standard blade style fuse, 5 Amp.
Only connect the Remote Sense™ terminal line to the Remote Sense™ terminal. The "R" and "I" Terminals are Not the
Remote Sense™ Terminal!
.
Technical support: USA 800 372 0222, Mexico 01 800 000 7378, Brazil 0800 703 3526, South America 55 11 3183 0384 or
visit
www.delcoremy.com
NOTICE
- Only licensed Delco Remy products and component parts should be used, and the use of other parts or modifications not approved by PHINIA
will void all applicable warranties. The failure to carefully follow these Instructions, set forth herein, will void all applicable warranties. DELCO REMY is a
registered trademark of General Motors LLC, licensed to PHINIA Technologies Inc.