C
3
Flip open the Razor Head Assembly and
clean the razor heads and hair chamber by
running under hot water.Water from the
tap should be on a hot setting,
BUT BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
4
Shake off excess water and close Razor
Head Assembly.
Once A Week: Charging Stand
1
Unplug the charging stand.
2
Clean the charging stand with a moist cloth.
Every Two Months: Razor Heads
IMPORTANT: Do Not mix up the cutters
and combs as the shaving performance may be
adversely affected for several weeks before
optimal shaving performance is restored.
1
Switch razor OFF.
C
2
Press the Razor Head Release Button
located under razor heads on front side of
Razor.
C
3
Remove the Razor Head Assembly and
clean the razor heads and hair chamber by
running under hot water. Be sure water is
not too hot so as to cause burns or
scalding.
ENGLISH
17