Descargar Imprimir esta página

CHIEF MI300i Manual Del Usuario página 30

Publicidad

Idiomas disponibles

Idiomas disponibles

3 - Traceability
By default, the SPOT software opens in «Traceability» mode. In «Point Setting» mode, click on Traceability in the Options menu.
3.1 - Importing point reports from an SD card :
To import the point reports made with a Mi300I into your PC, insert the SD card into the card reader on your PC and start the SPOT software.
Then select the reader into which your SD card is inserted and click on the button
When the import is performed, the weld spots performed are grouped by the maintenance order identifier. This identifier corresponds to the name
of the report specified in the welding machine. This identifier is displayed in the Current tab.
Once the reports have been imported, it is possible to search, edit or archive each report. To visualise the spot completed in a report, select a
report. The spots completed are displayed in the table.
To perform a search, fill in the search field and click on the button
To edit a report, select a report and click on the button
To archive a report, select a report and click on the button
been archived.
3.2 - Consult the archived spot reports:
To view the archived reports, click on the Archives tab. The reports are grouped by year and month.
To view the spots completed, select a report. The spots completed are displayed in the table.
For archived reports, it is possible to search, edit or delete a report.
Be careful, a report archived and then deleted will be imported again when importing data from an SD that has not been cleared.
To perform a search, fill in the search field and click on the button
To edit a report, select a report and click on the button
To delete a report, select a report and click on the button
3.3 - Clearing an SD card:
Clearing the card will erase all completed spot reports recorded on the SD card.
To clear an SD card, insert the SD card into the PC card reader and then, in the menu, click on Options and purge the SD card.
Be careful, when clearing, the spot reports completed that have not yet been imported will be automatically imported.
3.4 - To complete the information in a report:
Each report can be filled in with the following information:
Operator,
Type of vehicle,
Repair order,
Registration,
Date of first registration,
Intervention,
Comments.
To enter this data, select a report and enter the information in the report header.
3.5 - Printing a report :
To print a report, select a report and click on the button
3.6 - Exporting the edition in PDF format:
To export an edition in PDF format, select a folder, then click on the button
An example of saving the parameters printed using the ELEKTRON software is given below.
4 - Spot parameters
To switch to «Spot Parameter» mode, click on Spot Parameter in the Options menu.
The «Spot parameter» mode allows to use the operator to use spots set by the manufacturers. This mode also allows the user to choose his own
welding parameters.
- Insert the SD card supplied with the Mi300I spot welder into the reader of your PC and select the correct disk in the drop-down menu.
- Mi300I spot welders support up to 16 files that can contain up to 48 spot settings.
- The first file called «USER» cannot be deleted. It allows the user to add, modify or delete a spot parameter.
- The other files are reserved for the spot set by the manufacturers. It is possible to import manufacturer files downloaded from our website. It is not
possible to add, modify or delete a spot parameter taken from a manufacturer file.
4.1 - Import a manufacturer spot parameter file :
30
MI300I 220V
.
.
. Warning, please note that imported reports cannot be deleted until they have
.
.
.
. A preview of the edition is displayed. Click on the button
Double-click in the first column and enter a manufacturer name.
.
. A preview of the edition is displayed. Click on the button
EN
.
.

Publicidad

loading