Ingersoll Rand IQV20 IMPACTOOL W5111EU-K1 Manual Del Usuario página 7

To check the condition of the brushes remove the battery pack from the tool. Unscrew the brush caps and remove the brushes by lifting on the
metal tab. Note the orientation of the brush when it is removed, if re-installing, it should be inserted in the same orientation. It is normal for the
brushes to wear at different rates. If either brush is below the specified length in the diagram, replace both brushes to maintain peak performance.
Reinstall brush caps and tighten to proper torque.
Parts and Maintenance
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
Product Information: Battery
Product Safety Information
Intended Use:
These batteries are used as the power source for Ingersoll Rand Cordless Products.
• Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or
serious injury.
• Save all warnings and instructions for future reference.
• Responsibly recycle or dispose of Batteries. Do not puncture or burn Batteries. Improper disposal may endanger the environment or cause
personal injury.
For additional information, refer to Battery Safety Information Manual Form 10567840.
Manuals can be downloaded from www.ingersollrandproducts.com
Product Specifications
Models Chemistry
BL2005 Lithium Ion
BL2010 Lithium Ion
Operating Temperatures
Rechargeable batteries give their best performance when they are operated at a normal room temperature of 59°F to 77°F (15°C to 25°C). An
excessively hot or cold battery may prevent or interrupt the battery from being charged or discharged.
Parts and Maintenance
Labels are the only User Replaceable Parts.
Models Warning Labels
BL2005 BL20-99
BL2010 BL20-99-2
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
Product Information: Battery Charger
Product Safety Information
Important safety instructions - Save these instructions.
To reduce the risk of fire or electric shock, carefully follow these instructions.
Intended Use:
This Battery Charger is designed for charging Ingersoll Rand batteries only.
• Only use Ingersoll Rand charger with Ingersoll Rand IQ
may cause battery to burst when charging. Personal injury or property damage may result.
• Charger is not user serviceable. Repair should only be carried out by an Ingersoll Rand Authorized Service Center. User service may result
in electric shock, fire and/or serious personal injury.
• This is a class A product. In a residential, commercial or light industrial environment it may cause radio interference. This product is not
intended to be installed in a residential environment; in a commercial and light industrial environment with connection to the public mains sup-
ply, the user may be required to take measures to reduce interference.
• This product is not intended to be used by travelers.
For additional information, refer to Battaery Charger Safety Information Manual Form 10567832 and Battery Safety Information Manual
Form 10567840.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Specifications
Model Input
100-240V AC ~ 50/60Hz,
BC1120
100W, 160-215VA
47497354001_ed1
Voltage (V) Capacity (Ah)
20 1.5
20 3.0
Series Li-Ion batteries. Use of other batteries or chargers may create a risk of fire or
V20
Output
21V DC, 4.0A
USB Type A
5V DC, 500mA
WARNING
Weight (lbs (kg))
0.90(0.41)
1.52(0.69)
WARNING
DANGER
WARNING
Type Voltage
20V
Li-Ion
20V
USB Dedicated Charging Port
Battery
Model Number
BL2010
BL2005
D+ / D- Connected, 200 Ω
EN
Rated Capacity
3.0 Ah
1.5 Ah
EN-2