Publicidad
Idiomas disponibles
Idiomas disponibles
EN
8. If necessary, mount two connected aluminium water spray pipes in order to increase the radius
(Fig. 8)
9. Connect the large washing attachment to the aluminium tube, insert the liquid supply hose into
the appropriate socket (Fig. 9).
10. Plug in the power cable (Fig. 10).
11. Press the power switch, the light on the main panel switches on (Fig. 11).
12. Press the detergent feed button on the main cover panel or on the remote control panel, the large
washing attachment will spray water. When you press the suction button, the device will absorb
dirty water. After cleaning carpet is complete, press the main power switch to turn the device off,
then disconnect the power plug, empty the liquid waste from the container and clean the contain-
er (Fig. 12).
CAUTION!
Do not pour water into the tank when using the washing function! This container will gradually
fill with water during the process of its collection/washing.
When cleaning carpets, use a low-sudsing cleaning agent and add the appropriate anti-foam
evenly, otherwise the air outlet may cause foam to escape!
It is recommended to empty the container frequently during intensive washing / liquids collect-
ing works, in order to prevent a liquid level in the container exceeding critical levels and creating
the possibility of producing foam from the air outlet.
Lacking level of cleaning liquid in the container during the cleaning mode should be immediately
filled. Do not turn the liquid feeding process at idle (without liquid) in order to prevent pump
damage.
When the dust container is full or the safety valve is blocked, the sound of the motor becomes
louder. At this point, the vacuum cleaner should be immediately turned off and container emp-
tied.
BLOWER OPERATION
CAUTION! Always wear safety glasses when using the blower.
CAUTION! Do not allow debris to be blown onto people standing nearby.
Wear a dust mask if blowing produces dust that might be inhaled.
42
Publicidad
