MPM MOD-48 Manual De Instrucciones página 37

ASSEMBLING AND CONNECTING OF THE VACUUM CLEANER
CAUTION! Make sure that the power cord plug is disconnected from the power supply when
assembling the vacuum cleaner
1. Ensure the power cord is disconnected from the power socket (Fig. 1).
2. Loosen the container clamps (Fig. 2).
3. Lift the top cover off the container (Fig. 3).
4. Remove all accessories from the container (Fig. 4).
5. Put the cover on the container, having previously mounted the appro-
priate filter (for wet washing or for collecting water: put the sponge
filter of the water filter on the float chamber of the vacuum cleaner
(Fig. 1) or mount the HEPA filter (Fig. 2) and put a paper dirt bag on the
internal air sucking inlet (Photo 3) for dry vacuuming; then close the
clamps on both sides of the container (Fig. 5).
6. Insert the suction hose into the air suc-
tion inlet and tighten it clockwise. Then,
insert the washing liquid supply hose into
the washing liquid hose outlet socket.
Check whether the appliances have been
properly installed (Fig. 6).
CAUTION! The hose for feeding the
washing liquid enters the appropriate
outlet socket' "click" ensures the prop-
er mount. Press the white button for dismantling it.
Photo 2
EN
Photo 1
Photo 3
37