Publicidad
Idiomas disponibles
Idiomas disponibles
BATTERY ASSEMBLY AND REPLACEMENT
Warning!
Do not treat electrical appliances as unclassified municipal waste, use separate collection facilities. For information on avai-
lable collection systems, contact your local government.
• Do not remove the lithium battery without authorization.
• When removing the lithium battery from the vacuum device, please remove the ring, bracelet, necklace and
• watch.
• The short-circuit current generated by a battery is enough to adsorb the ring (or similar items), causing severe
• burns.
• Before removing the battery pack, please wear eye protection cover, gloves and protective clothing.
• Be careful not to touch the wire or any metal parts, or it will cause spark or short circuit.
• Do not smoke, spark or flame near the cleaner, or it will ignite the battery and produce gas.
• Avoid exposing the battery to fire or high temperature, otherwise it may cause explosion.
Note!
In case of battery leakage, avoid contact with the damaged battery and put it in a plastic bag.
If skin or clothing is in contact with acid, wash immediately with plenty of soap and water.
If the eyes are in contact with acid, rinse the eyes with water for at least 15 minutes and se.nd them to a doctor for treatment.
BATTERY REPLACEMENT
NOTE: User must consult dealer before any battery replacement.
1. Loosen the sealing cover of the charging port in a counterclockwise direction, unscrew the top three screws with a screw-
driver, and open the cover, as shown in the following figure.
2. Use a screwdriver to unscrew the five screws on the motor cover, open the cover and find the battery connection wire.
Press the clip on the connector and then pull it out, as shown in the following figure.
3. After taking out the battery, please wrap the connector with Electrical tape immediately to avoid short circuit caused by
contact between two wire terminals.
4. After replacing the battery, follow the disassembly steps
to reinstall the battery and other parts.
Publicidad
