Hazet-Werk 7901 E Instrucciones página 22

Measurement screen
Operating mode
Setpoint value
display line
Short press
changes
the units of measurement
(Nm, lbf.ft and lbf.in, etc.)
Long press
Use the UNITS MENU to
activate or deactivate units
(Press and hold)
Short press
changes the operating
mode
(Track, click and dial)*
Long press
Use the CLICK MENU to
change the click mode set-
tings
(Press and hold)
* Track = Tracking measurement / display
value (no value saving)
Klick = Automatic click point detection
(first peak)
Dial = Peak value measurement (final peak)
22
Operating instructions
2
Selected setpoint
value
Measurement units
Short press
changes
the selected setpoint value
(T01 XXX.X, T02 XXX.X, etc.)
The units are automatically
changed to the setpoint units.
NOTE:
T-- ---- means that no
setpoint value is set
Long press
Use the TARGET MENU to
edit setpoint values
(Press and hold)
Short press
resets a detected peak
value
In track mode (and click
mode if set to manual reset)
Zeroes the measured value
In track mode with a meas-
ured value < 4% of the max.
value.
In click and dial mode with a
measured value < 1%.