How To Prepare The Machine For Operation; Lift Handle - Clarke BEXTSPOT 04153A Manual Del Operador

How To Prepare the Machine For Operation

Before using this machine check the following:
1. Check all fi ttings and connectors for proper assembly.
2. Check all hoses for leaks. Repair or replace any damaged
hoses.
3. Check power cord for any damage. If damaged, replace.
Filling the machine:
1. Fill the solution tank with clean hot or cold water.
WARNING: Do not use water that is hotter than
140°
2. Use only brand name cleaner and mix the cleaner per
package instructions.
Switches
B S
EXT POT
®
Clarke TM
Operator's Manual (EN)
Water Pump
Turn the pump switch ON. This pump is a by pass pump and
operates continuously.
Vacuum (see fi gure 2)
1. Be sure access lid is on vacuum tank.
2. Make sure the latchs connecting the vacuum tank and
3. Turn switch ON.
Latch
Figure2
ENGLISH
the solution tank are secure.

Lift Handle

Lid
EN
Vacuum Inlet
Quick Disconnect
FORM NO. 70781A - 5 -