Fault
Power and filter indicators
flash 10 seconds after
plugging in and an
acoustic signal sounds
Gap between control unit
and pump-filter unit
Technical Specifications
Note: Due to our continuing program of research and development, the specifications herein may be
subject to change without notice.
Model
Nominal voltage
Nominal power consumption
Maximum power
Noise level
User control
Operating temperature
Storage temperature
Weight
Acoustic signal
Particle uptake
Particle filter
Operation
*Regular bread crumbs
CU489_ML_A5_v2_20231010.indb 9
Probable Cause
•
Start/Stop button defective
•
Control unit wet inside
•
Filter cover not closed
properly
•
Filter cover or pump-filter
unit bent
CU489
220-240V~, ±10%, 50-60Hz
Approx. 2.0A at 230V
500W
<85db
Start/Stop button
Control unit (6): Max. 75°C;
Pump-filter unit (9): Max. 200°C;
(Recommended frying temperature: Max. 175°C)
+10°C to +30°C
10.2kg (with drip pan);
8.8kg (without drip pan)
Yes
Approx. 2.5kg* (3 l)
Cellulose FDA-CFR 21
Intermittent operation
Solution
•
Call Buffalo agent or qualified
technician
•
Please let it dry
•
Close the filter cover properly and
snap it into the pump-filter unit
•
Call Buffalo agent or qualified
technician
EN
9
2023/10/10 17:31:34