Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
The noise emission values and vibration
emission value can vary from the specified
values during the actual use of the power
tool, depending on the type and the manner
in which the electric tool is used, and in
particular the type of workpiece being pro-
cessed.
Try to keep the stress as low as possible. For exam-
ple: Limit working time. In doing so, all parts of the
operating cycle must be taken into account (such as
times in which the power tool is switched off or times
in which it is switched on, but is not running under a
load).
7
Unpacking
WARNING
The product and the packaging material are not
children's toys!
Do not let children play with plastic bags, films or
small parts! There is a danger of choking or suf-
focating!
• Open the packaging and carefully remove the prod-
uct.
• Remove the packaging material, as well as the
packaging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. Immediately report any damage to the
transport company that delivered the Product. Later
claims will not be recognised.
• If possible, keep the packaging until the expiry of
the warranty period.
• Familiarise yourself with the product by means of
the operating manual before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the prod-
uct.
8
Before commissioning
8.1
Wall mounting of the charger (13)
(Fig. 1)
WARNING
–
Before wall mounting, make sure that there are no
lines in the wall in the area of the drill holes that
could be damaged.
–
Lay the mains cable so that it does not obstruct
you and no one can accidentally pull on it.
–
Children must not play with the product, even if it
is hanging on the wall.
–
Mounting behind doors and their swinging range
is not recommended, as there is a risk of tearing
off or otherwise damaging the product.
WARNING
The product must never be operated on a combusti-
ble surface.
WARNING
Never attach the product to a wet surface.
* = not included in the scope of delivery!
The battery charger has two holes on its back for wall
mounting with two screws*. It can be hung on a wall,
taking into account the safety instructions and the di-
mensions given (see Fig. 1).
8.2
Mounting the belt clip (11)
1. During work breaks, the product can be hooked on-
to the belt with the integrated belt clip (11).
2. Screw the belt clip (11) with the screw (12) to the
right or left screw-on point on the product, as re-
quired. Use a Phillips screwdriver for this (not in-
cluded in the scope of delivery).
Note:
Make sure that the product is switched off and secured
against being switched on.
9
Operation
The cordless drill with 2-gear transmission has a 25+1
level torque adjustment, clockwise/anticlockwise rota-
tion, quick-release chuck and an LED work lamp.
Please refer to the following descriptions for the func-
tion of the controls.
www.scheppach.com
GB | 27
Publicidad
