Publicidad
Idiomas disponibles
Idiomas disponibles
Directions for use
Hook
1. Unfolding frame
Release the hook, hold the handlebar with both hands and lift it up
until a click is heard which means the frame is fully open. After
opening the frame, open the front wall tube forward, put the cloth
cover into the frame, stick to the burrs around the wall tube, and
then stick the storage board to the cloth cover burr on the rear wall
tube.
2. Install & disassemble
front wheels
As shown in the picture,
insert the front wheel into the
hole of the front wheel seat
and hear the "click".
Hold the removal button and pull it down, the front wheel can be
removed.
06
Rear wheel set
Iron gasket
Rear wheel axle
Brake bar
Rear wheel
3. Install & disassemble rear wheels
As shown in the picture, First put the iron gasket on both sides of
the rear wheel axle,then put the rear wheel axle and brake bar into
the rear wheel set, and then install the rear wheel. After the rear
wheel is installed, press white buckle to the outer axle hole of the
rear wheel, then black buckle, cover the rear wheel cover, and
then put the rear wheel set on the rear tube.
Hold the remove button and put it out, the rear wheel set can be
removed.
Rear wheel cover
Black buckle
White buckle
07
Publicidad
