Publicidad
When you hear a clicking sound, they are fixed to each other (Figure 4). Insert the two ends of the mounted upper
frame into the seat frame openings as shown in Figure 5. When you hear a clicking sound, the frame is fixed.
5. Placing the upholstery - Figure 6: Place the seat upholstery (8) on top of the structure, leaving the plastic part for
placing the toy grip (7) exposed, and stretch the upholstery on both sides. Pull the bottom right corner of the
upholstery to the right of the seat tube first, then pull the upholstery from right to left until it is fully seated (Figure 6).
6. Inserting the Toy Griff - Figure 7: Insert the Toy Griff (7) directly into the plastic base of the structure as shown in
Figure 7.
7.Removing the seat - Figure 8: Press the red button and pull the seat up as well as shown in Figure 8.
Installing the restraint system – illustration D
Place the baby in the cradle and fasten the belt on both sides. To unfasten the belt, press the buckle.Adjust the belts so that
they well the child and are not twisted.
Power supply with adaper (Adapter in) – illustration E
Input AC 100-240V - 50/60Hz and output DC 6V/1A. Insert the adapter tip into the control and music panel input and
the adapter plug into the mains socket (230V).
Control panel functions – illustration F
Power button (On/off): The swing has 3 swing speeds. When you press the button once, the swing turns on the
first swing speed and the first indicator light turns red. When the button is pressed again, the swing switches to
the second swing speed and the second indicator light turns red. When the button is pressed three times, the swing
switches to the third swing speed and the third indicator light turns red. On the fourth press of the button, the swing
will stop swinging, the indicator light is off.
Music button with 8 melodies/Volume control: Each melody is played twice before automatically changing to
the next. To adjust the volume, hold down the button indicated in illustration F until the desired sound is reached.
Remote control functions – key G:
Attention! To operate the functions of the swing, you must point the remote control device at the control box
panel and tunes.
CLEANING
✓ Clean the upholstery of the product with a soft cloth soaked in warm water and mild soap. After cleaning,
allow the product to dry completely. Do not use strong detergents, bleach or detergents with abrasive particles. It is
forbidden to clean the upholstery in a washing machine, dryer, dry cleaning, bleaching and spinning.
✓ Clean the structure with a damp soft cloth and mild soap. Dry with a dry soft cloth. DO NOT USE WET WIPES,
STRONG CLEANERS, DISINFECTANTS OR SUCH WITH ABRASIVE PARTICLES!
✓ Only clean toys with a soft, slightly damp cloth. DO NOT WET THEM!
Maintenance
Regularly check fixed and moving parts for looseness, damage or breakage. Do not repair the product yourself, but
contact an authorized service center or the sales agent from whom you purchased the product. Otherwise, your
warranty will be void. Periodically clean the product. Do not leave the product to the harmful effects of external factors
- direct sunlight, rain, snow or wind. This can damage metal and plastic parts and bleach upholstery. Store the product
in a dry and ventilated place, not in dusty, damp rooms with very low or very high room temperatures.
OPERATING INSTRUCTIONS
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
Manufactured for Moni in PRC
Manufacturer and Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90, Website:
www.moni.bg
17
Publicidad
