Ego Power+ CS2000E Manual página 8

SPECIFICATIONS
EN
Rated Voltage
Max. Chain Speed
Chain Pitch
Chain Gauge
Guide Bar Length
Saw Chain Type
Guide Bar Type
Chain Oil Tank Capacity
Weight (without battery pack,
saw chain, guide bar, side
cover, oil and chain sheath)
Recommended Operating
Temperature
Recommended Storage
Temperature
Recommended Charging
Temperature
Measured sound power
level L
WA
Sound pressure level at
working position L
PA
Guaranteed sound power
level L
WA
(according to 2000/14/EC)
Front Handle
Vibration a
h
Rear Handle
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should wear
gloves and ear protectors in the actual conditions of use.
8
56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E
PACKING LIST (FIG.A1)
DESCRIPTION
56 V
KNOW YOUR CHAIN SAW (Fig. A1)
25 m/s
1. Saw Chain
3/8" (9.5 mm)
2. Bucking Spikes
3. Chain-kickback Brake Paddle
1.3 mm
4. Front Handle
50 cm
5. LCD Screen
AC2005
6. Speed Bars
7. Bluetooth Icon
AG2005
8. Headlight Icon
250 ml
9. Brake Icon
10. Fuel-gauge Circle
3.9 kg
11. Headlight/Bluetooth Button
12. Chain Speed Button
13. Lock-off Button
-15°C-40°C
14. Trigger Switch
15. Rear Handle
16. Battery Release Button
-20°C-70°C
17. Oil-inspection Window
18. Oil-tank Cap
5°C-40°C
19. Guide Bar
20. Lubricating Hole
103 dB(A)
21. Side Cover
K=1.7 dB(A)
22. Side Cover Nuts
89 dB(A)
23. LED Headlight
K=3 dB(A)
24. Chain-tensioning Bolt
25. Double-end Socket Wrench
26. Chain Sheath
105 dB(A)
ASSEMBLY
4.69 m/s
2
ASSEMBLING/REPLACING THE BAR AND CHAIN
K=1.5 m/s
2
4.24 m/s
2
K=1.5 m/s 2
in the braking position before assembly.
1. Position the chain saw power head on its side with the
2. Remove the side cover by turning the two lock nuts
3. Turn the chain-tensioning bolt counterclockwise to
4. Lay the saw chain in a loop on a flat surface and
5. Place the chain drive links into the guide bar groove
6. Hold the chain in position on the guide bar and place
WARNING:
Adjust the chain-kickback brake paddle
side cover facing upwards (Fig. B).
counterclockwise.
loosen the chain tension.
straighten any kinks (Fig. C).
and make the chain a loop at the back of the guide bar
(Fig. D).
the loop around the sprocket of the saw (Fig. E1).