Publicidad
Idiomas disponibles
Idiomas disponibles
Tower Fan Use Instructions
Description of product Fig.A
1. Base
2. Main unit
3. ON/speed/swing selector
4. Bolt
5. Bolt support
Assembly Fig.B
Assemble the base of the fan as shown in Fig.B (a-c).
Place the fan on a flat and stable surface.
Important: make sure that all components are securely fixed and well assembled before use, to avoid
dangerous vibrations during operation.
Use
Connect the fan to a wall socket and place the selector on the desired position:
turn it right to select speed from 1 (low) to 3 (max) without swing function
turn it left to select speed from 1 (low) to 3 (max) with swing function
Place the selector on 0 to switch the fan off.
Cleaning
Before cleaning make sure that the fan is switched off and disconnected from the wall socket.
Clean the main unit with a soft cloth, slightly dampened if needed.
Do not use alcohol or chemical detergents such as diluents or abrasive products in general.
Warning: do not spray water or other liquids directly on the fan; do not allow water or any other
liquids to penetrate through the openings of the grid.
Make sure the fan is completely dry before using or storing it.
If not used for a long period of time, store the fan in a cool and dry place, away from dust and direct sunlight.
Technical data
Power 45W
220-240V~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
10
Publicidad
