Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance and cleaning
CAUTION
Risk of injury due to unexpected start-up. Internal monitoring functions may switch off the unit
and automatically reactivate it.
Disconnect the power plug before carrying out any work on the unit.
NOTE
Do not use aggressive cleaning agents or chemical solutions. These agents can damage the
housing, impair the function of the device and harm animals, plants and the environment.
If possible, clean the unit with clear water and a soft brush or a sponge; remove stubborn dirt
with the aid of the recommended cleaning agents.
Dismantling the unit
• Pull the power plug and remove all connections.
• Dismantle the unit as shown in the figure.
• Reassemble the unit in reverse order.
• During assembly check that
– the pump is fastened in the holder.
– the power cable is guided out through the groove on the housing and is not significantly
kinked or pinched.
Cleaning the device
Clean the unit as required but at least twiceper year.
− When cleaning the pump, pay particular attention to the impeller unit and the pump
housing.
• Recommended cleaning agent for removing stubborn limescale deposits:
– Pump cleaning agent PumpClean from OASE.
– Vinegar- and chlorine-free household cleaning agent.
• After cleaning, thoroughly rinse all parts in clean water.
34
AMX0204
Publicidad
