Disposal; Troubleshooting; Technical Data - Fuller 56002 Manual De Instrucciones

Mopa a vapor con luz uv
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The packaging material is recyclable. Please dispose of it in an environmentally friendly
manner.
If the appliance should stop working properly, first check whether you are able to correct the
problem yourself. Otherwise, contact our customer service department. Do not try to repair
a faulty appliance yourself!
Problem
No steam is being
produced.
The
control
lamp
does not light up.
Model:
Input steam mop:
Input UV lamp:
Power:
Steam temperature:
Capacity water reservoir:
Steam Mop_56002(02608)_US+ES_IM_V1_130516.indb 11

DISPOSAL

TROUBLESHOOTING

Possible cause/solution
- Is the on/off switch (20) in position I?
- Is the plug connected to a suitable wall outlet?
- Is the wall outlet defective? Try another wall outlet.
- Check the fuse of your wall outlet.
- Has the appliance reached its operating temperature? The
appliance needs to heat up for around 30 seconds before steam
can be produced.
- Is the water reservoir empty? Refill the water reservoir (see the
chapter "OPERATION", section "Filling the water reservoir").

TECHNICAL DATA

56002
120 V ~, 60 Hz, 12 A
4.5 V
(3 x 1.5 V, batteries AA type)
approx. 1500 W
approx. 212 °F (100 °C)
approx. 13.52 oz (400 ml)
11
5/16/13 5:12 PM

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para Fuller 56002

Tabla de contenido