EGO PRO X PGX1600E-H Manual página 8

DESCRIPTION
EN
KNOW YOUR HUB (Fig. A)
1. Hub Status Indicator
2. Bluetooth /WI-FI Button
®
3. Bluetooth /WI-FI Indicator
®
4. Power Cord
5. Collar
6. Connector
7. Rubber Block (2)
8. Wall-mount Hole (4)
9*. Dock Status Indicator
10*. Battery-bay Status Indicator for Dock (3)
11*. Power Bank AC Status Indicator
12*. Battery-bay status Indicator for Power Bank (3)
* NOT INCLUDED
OPERATION
CHARGING BATTERY PACKS
The PGX 1600W hub is designed to charge EGO
TM
battery packs installed in the EGO PGX
PGX3000D and/or charge EGO battery packs installed in
the EGO PGX POWER BANK PGX1400PB. Read operator's
TM
manual included with the dock and power bank.
NOTE:
Lithium-Ion battery packs are shipped partially
charged. Before using them for the first time, fully charge
the battery packs.
◾
Ensure that the power outlet fuse or circuit breaker is
rated for at least 10 Amps.
◾
Avoid using a power outlet with oxidized or damaged
pole pieces.
◾
During charging, the battery packs must be placed
in a well-ventilated area (for hubs for battery packs
that release gases into the atmosphere during normal
charging).
Hub Compatibility with Dock and/or Power Bank
(Fig. C)
Fig. D1 shows how to charge the battery packs via
the docks:
1. Push the collar of the hub connector onto the dock
until you hear a click as shown in Fig. D1 (step 1).
NOTE:
To disconnect the hub from the dock as shown in
Fig. D2.
8
56 VOLT PGX
2.
3.
4.
5.
6.
7.
8.
TM 3-PORT DOCK
NOTE:
◾
◾
NOTE:
in the same dock/power bank, refer to the operator's
manuals of EGO Dock PGX3000D and EGO Power bank
PGX1400PB.
1600W HUB — PGX1600E-H
TM
Connect the dock to the next dock in the same way
(step 2).
Plug the hub into the power supply (step 3). The
hub status indicator and dock status indicator will
glow green, indicating that the hub and the dock are
working properly and can charge the battery packs.
Align the raised ribs of a battery pack with the
mounting slots in one of the dock's battery bay. Slide
the battery pack down into the battery bay (step 4).
The battery release button will spring up indicating
that the battery pack is securely attached.
The hub will communicate with the battery pack
installed on the dock to evaluate the condition of
the battery pack. When the battery pack meets the
charging conditions, the hub will begin charging
the battery pack and the hub status indicator and
the battery-bay status indicator (above the inserted
battery pack) will flash green.
Insert more battery packs on the docks.
When connecting more docks to the hub, the hub will
supply power to the docks in the order of proximity
– the dock nearest to the hub is powered first. The
flashing green battery-bay status helps identify
which battery is currently charging.
When the battery packs are fully charged, the
hubstatus indicator and the battery-bay status
indicators will glow solid green. The "fuel gauges" on
the battery packs will go out. It is recommended to
disconnect the hub from the power supply, if it is not
going to be used for a long period of time.
A significantly reduced run time after fully charging a
battery pack indicates that the battery pack is near the
end of its usable life and must be replaced.
The hub, dock and power bank may get warm during
charging. This is part of the normal operation. Charge
in a well-ventilated area.
For the charging sequence of the battery packs