Advanced Bionics CI-7523 Instrucciones De Uso página 10

Adjusting Magnet Strength
To adjust the magnet strength of the headpiece you will need to:
1. Remove the color cap using the 3D Color Cap Removal Tool.
2. Remove the magnet from the magnet well.
3. Replace magnet as needed per the Magnet Strength chart using the minimum
magnet strength required to maintain retention.
4. Orient the arrow on the magnet in a general upward direction using the 3D Color
Cap Removal Tool.
5. Attach the color cap.
If you note retention issues, it may be because the arrow on the magnet is not oriented
in the recommended direction. If retention issues persist following use of the highest
strength magnet option, contact Advanced Bionics Customer Service.
8