B
Product usage
•
If the door lock indicator doesn't flash, it indicates that current temperature is over 50°C
or you have passed the time for reloading in the process, namely no clothes allowed to
load into the machine.
Change programme or optional function during operation
•
Turn the programme selector knob on position «OFF» for 3 seconds to turn off the machine;
•
Restart the machine and select new programme and options. If needed, select spin speed.
•
Re-press «Start/Pause» button to start new programme. Don't add detergent any more.
Programme end
After the program ends and «END» is displayed, the door lock will be unlocked and the knob
will be turned to OFF to power off; if there is no button or knob operation within 2 minutes,
the program will automatically shut down;
•
Turn the programme selector knob on position «Off» for 3 seconds to turn off the machine;
•
Close the tap;
•
Open the door and take the washed clothes out;
•
Slightly open the door to remove moisture in the tube.
Opening/closing door
•
After the procedure ends,the «End» indicators is on and the door lock indicator light goes
out. At this time, the door can be opened.
•
If the door needs to be opened, press «Start/Pause» button, and if the door lock indicator
light flashes, it shows that the unlocking condition is met; in 2 minutes, the door lock
indicators goes out, and at this time, the door can be opened; if the door lock indicators
does not flashes, it shows that the unlocking condition is not met; under such situation,
if the door needs to be opened, turn the programme selector knob on position «OFF»
for 3 seconds to turn off the machine and restart the washing machine; select «Spin»
procedure, and set the spin speed as « 0 ». After the procedure operation ends, door lock
indicators goes out, and at this time, the door can be opened.
•
Never open the door forcibly while the machine is running, otherwise you can damage
the door lock.
•
To open the door, hold the door handle and pull the door. Close the door by pressing it
without excessive force until it clicks shut.
Child lock
To strengthen the safety of children, the machine is equipped with «Child Lock» function.
•
When the programme starts, press «Spin + Options» button for 2 seconds, the «Child lock»
indicator light is on then Child Lock is set up; When the Child Lock is set, all function
buttons except «Off» will be shielded.
•
After the program ends, Child lock function will release automatically. Any error alarm
will release the Child Lock function. Turn off and on the machine manually will reset the
machine.;
•
When power is shut down, child lock is released.
Programme Instructions
1.
The eco 40-60 programme is able to clean normally soiled cotton laundry declared to be
washable at 40°C or 60°C, together in the same cycle, and that this programme is used
to assess the compliance with the EU ecodesign legislation.
21
EN