Publicidad
Coating Thickness Gauge, for Iron Metals
INTRODUCTION
This instrument is a compact designed, portable, digital and easy to use 3 ½ digit display instrument
for coating thickness measurement. It was a comfortable, one-handed Operation designed. The meter
includes an illuminated LCD display, offers an AUTO-HOLD function, and has an automatic shut-off
(about 15 sec. After releasing the trigger).
CAUTION
• Do not use the instrument near by a device, which generates a strong magnetic or electro-static
field. This could lead to faulty test results.
• Do not expose the instrument no corrosive or explosive gases. The instrument could be damaged.
• Do not expose the instrument to direct sunlight or condensation. This could lead to deformation of
the case and damage the insulation or the instrument may not be able to work anymore as
described.
• Don't store instrument on or near hot objects (70 ° C/158 ° F). It could lead to damage of the
housing.
• Should the instrument be exposed to extreme temperature fluctuations (hot to cold and cold to hot),
take into account a period of about 30 minutes for temperature stabilization before using the device.
• If the unit is used for longer than a minute may lose the values of accuracy. The device remains in
the calibrated range of accuracy.
• Condensation may affect the sensor. Consider a period of 10 minutes to allow decay before starting
to clear any condensation occurring.
• This device is neither water nor dust. Sure to use it in damp or very dusty environment.
• Make sure always assume that the probe set on the layer to be measured resting and create no
difficulties.
• Before the measurement, if any air bubbles between coating layer and substrate may interfere with
the measurement.
• Manual calibration is necessary before each use.
• Two-point calibration is recommended to use the device to repetitive measurement points. To
achieve maximum accuracy
SW-Stahl und Werkzeugvertriebs GmbH
L
e
v
e
k r
u
s
r e
t S
a r
s
s
e
6
5
D
4 -
2
8
9
7
R
e
m
s
c
h
e
d i
Tel. +49 (0) 2191 / 46438-0
F
ax +49 (0) 2191 / 46438-40
- E
M
a
: l i
n i
o f
@
s
w
s
a t
l h
d .
e
Art. 2193
Publicidad
