Kenmore 911.41475 Manual De Instrucciones página 30

CARE ANDCLEANING
CleaningRemovableParts
Glass Retainer
._&.._
I
I
Bulb---_
i
I
Live Collar
TO REMOVE THE COVER
1. Disconnect electrical power to the
oven at the main circuit breaker or
fuse box.
2. Unscrew the glass cover and
remove,
Do not touch a hot
oven light bulb. Do
not touch a bulb with
wet hands or wet
cloth, Never touch the
electrically live collar on the
bulb when removing or
replacing the bulb. Do not
REPLACE THE LIGHT BULB
Unscrew the light bulb and replace it with
a 40-watt home appliance bulb,
TO REPLACE COVER
1. Screw down the glass cover
2, Reconnect electrical power
Broil Stop Position
Hinge
TO REMOVE
1. Open the door to the broil stop
position,
2, Grasp the door at each side and lift
up and off the hinges, DO NOT
LIFT DOOR BY THE HANDLE.
P_ L ,,, i , , m
_ AUTION: When
the door is removed
and the hinge arms
are at the broil stop
position, as a precaution,
cover the hinge arms with
toweling or an empty paper
towel roll, Do not bump or
try to move the hinge arms
while working in the oven
area, They could snap back
causing injury to the hands
or damage the porcelain
finish of the front frame.
L
TO REPLACE
2.
3.
4.
5.
6.
Remove the paper towel rolls or
towels.
Make sure the hinge arms are in the
broil stop position
Lift the door by the sides.
Line up the slots at the bottom edge
of the door with the hinge arms,
Slide the door down onto the hinge
arms as far as it will go,
Close the door,
3O