Silvercrest KH 1172 Instrucciones De Uso página 66

What do I do if smoke comes from the baking space
6
or the ventilation slots
What has happened if the ingredients are not correctly
mixed or the bread is not correctly baked through?
7
Why does the display
appliance doesn't allow itself to be started?
?
show „H:HH" and the
• Remove the power plug immediately! Allow the appliance
0
to cool down, then remove the baking mould
Clean the exterior of the baking mould
the baking space
sed by food residues. Should there be no food residues in
the baking space
4
baking mould
on. Make contact with the Customer Service department.
• A false programme has been selected.
• The button Stop/Start
operation.
• During the baking process there was an extended
power failure.
• The appliance lid
the baking process.
• The kneading hook
Remove the ingredients and do not re-use them. Remove
the baking mould
5
shaft turns. Should this not be so, make contact with
our customer service department.
• The appliance is still too hot from the previous baking
process. Press the button Stop/Start
adjustments appear in the display
to cool down, with the lid
Afterwards, the appliance allows itself to be used as
normal.
- 64 -
4
0
, as the smoke was probably cau-
0
or on the exterior surfaces of the
, do not switch the appliance back
has been pressed during
2
was opened several times during
q
is blocked.
4
and check to ensure that the drive
until the default
7
. Leave the appliance
2
open, for approx. 20 minutes.
4
.
as well as