Publicidad
Idiomas disponibles
Idiomas disponibles
Installation - Surface Mounting Only
1
Drilling Hole on wall
WARNING: If installing the mirror on drywall
or other hollow wall applications, the
Phillips head screws (BB) must be fastened
to studs, headers, or other structural wall
members. The included plastic wall anchors
are intended for use with solid wall
applications only (tile or concrete). DO NOT
USE WITH DRYWALL OR OTHER HOLLOW WALL
APPLICATIONS.
□ The center distance of the two drilling holes
on wall: 228.5mm (9 inches).
□ Insert the plastic wall anchors into the
holes and then tighten the screws to them.
w
9.00in
228.50mm
2
Electric Wire Connection
Warning:This unit must be installed by a certified
electrician and in accordance with all local and
national electrical codes.
□ Loosen 1 Screw to remove the wiring compartment
cover.
□ Use screw driver to break off one of the knock
r
outs from the wiring compartment cover so as to
form one hole to let power supply wires to pass
through.
NOTE: It is only necessary to remove the
knockout(s) that will feed the power supply wiring,
keeping in mind the mirror mounting location and
supply wire location..
□ Connect power supply wires to the wires of this
unit with wire connectors (CC) - black (Live wire)
and white (neutral). Ground wire should be secured
to the green wire OR yellow-green wire.
□ □Replace the wiring compartment cover and replace
with the 1 Screw.
Black
White
Green
5
Lowes.com/allenandroth
Wire Nut
Connect
Live
Neutral Power Source
120V AC 60Hz
Ground
Wiring Diagram
Publicidad
