Publicidad
Idiomas disponibles
Idiomas disponibles
• The speed of the mower will affect the quality of the
mower cut. Mowing at full speed will adversely affect
the cut quality. Control the ground speed with the drive
control levers.
• When approaching the other end of the strip, slow down
or stop before turning. A U-turn is recommended unless
a pivot or zero turn is required.
• Do not attempt to mow heavy brush and weeds or
extremely tall grass. Your mower is designed to mow
lawns, NOT clear brush.
• Keep the blades sharp and replace the blades when worn.
30
When stopping the mower for any reason while on a grass
surface, always:
• Move the drive control levers fully outward into the
Parking Brake engaged position.
• Shut engine off and remove the key.
• Doing so will minimize the possibility of having your
lawn ''browned'' by hot exhaust from your mower's
running engine.
CRUZ ZERO TURN MOWER
6.
Maintenance
Good maintenance is essential for safe, economical, and
trouble-free operation. Follow the inspection and mainte-
nance recommendations and schedules in this manual.
Before adjustments and repairs:
• Use ONLY the correct tools.
• DO NOT tamper with the governor spring, links, or other
parts to increase engine speed.
• Replacement parts must be of the same design and
installed in the same position as the original parts. Other
parts may not perform as well, may damage the unit,
void the warranty, and may result in injury.
WARNING: Improper maintenance, or failure to
correct a problem before operation, or use of
non-conforming replacement components, can cause
malfunction and could result in death or serious injury.
CAUTION: Before performing any type of
maintenance/service, disengage the blades, shut off the
engine, and wait until all moving parts have come to a
complete stop. Disconnect spark plug wire and keep it
away from the spark plug. Always wear safety glasses
while performing any adjustments or repairs.
NOTICE: Refer to engine operator's manual for
detailed engine maintenance.
NOTICE: If you are unsure how to perform any of the
maintenance items listed below, please contact customer
service 888-693-2582 or a qualified service center for
assistance.
CRUZ ZERO TURN MOWER
Maintenance Schedule
Zero Turn Mower
Every 8 Hours or Daily
Check the safety interlock system.
Remove any debris from the mower,
mower deck, and engine compartment.
Every 25 Hours or Annually*
Check the tire pressure.
Check the mower blade stopping time.
Check for loose hardware on the mower.
Every 50 Hours or Annually*
Clean the battery and cables.
Check the mower brakes.
See an Authorized Service Dealer Annually
Lubricate the mower.
Mower blades check**
*Whichever comes first.
**Check the mower blades more often in regions with
sandy soils or high dust conditions.
31
Publicidad
