WEG CF W100 Serie Manual Del Usuario página 3

The table below describes all revisions made to this manual.
Version Review
V1.0X R00
ATTENTION!
Check the frequency of the power supply.
In case the power supply frequency is different from the factory setting (check P403), it is necessary
to set:
P204 = 5 for 60 Hz.
„
P204 = 6 for 50 Hz.
„
It is only necessary to set these parameters once.
Refer to the programming manual of the CFW100 for further details about the programming of
parameter P204.
First edition
Summary of Reviews
Description