Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting the Wireless Clamp to the DM4-W
(See DM4-W manual for more information)
Example: How to connect the T1 "blue" clamp. Remove the wired K-Type connector
(if applicable).
If the clamp has not been paired to the DM4-W yet:
1. Turn on the DM4-W and the wireless clamp (on startup, note the last 4 digits of the
clamp Serial Number)
The wireless clamp OLED should show a blinking Bluetooth Connection symbol
2. Press the ENTER button on the DM4-W to enter the menu
3. Highlight "Bluetooth Device" and press the ENTER button
4. Wait until the "Wait..." text disappears
5. Look on the right side for available devices (There is a "Paired Devices" list on the left
side that will populate when wireless devices are paired with the DM4-W)
6. Highlight the T1 device that you want to connect from the "Available Devices" and
press the ENTER button and press the POWER button to "Add T1"
7. Repeat these steps to connect the T2 "red" clamp
8. Press the ZERO button to return to the home screen
9. The clamp should pair with the DM4-W and the clamp OLED screen should show a
solid Bluetooth Connection symbol. The DM4-W screen should show the temperature
and the last 4 digits of the connected wireless clamp serial number under the T1.
If the clamp has already been paired to the DM4-W:
1. Turn on the DM4-W and the wireless clamp. The wireless clamp should automatically
connect to the DM4-W, and the Bluetooth Connection symbol should remain solid.
NOTE: If a K-Type clamp is plugged into the DM4-W, the K-Type values will take priority.
The DM4-W screen will show K-Type under the T#.
JB INDUSTRIES • Wireless Temperature Clamps Operating Manual • 630.851.9444 • sales@jbind.com
7
Publicidad
