Cameo PIXBAR G2 Manual De Usuario página 25

VERTICAL HANGING MOUNTING ON A TRUSS
For vertical hanging mounting, up to three
PIXBAR G2 may be connected to each other.
®
The following optionally available products must
be used for this:
1 A suitable truss clamp with sufficient
load-bearing capacity for the total load (e.g.
half coupler).
2 One Omega bracket (article number
CLOMEGABRACKET1).
3
One stop set (article number CLPBG2VERTI-
MOUNT).
4
One or two connecting elements are re-
quired to connect two or three PIXBAR
and to secure the connection (item number
CLPBG2STACKKIT).
The safety eyelet of the top foot of the top bar
serves as a safety point. Make sure that the
safety cable used to secure the bars is suitable
for the total weight of the bars.
For optical reasons, the mounting feet can be
folded to the side of the housing. A rubber buffer
prevents the surface from being damaged.
1
2
G2
®
3
4
25