FOR-X XAP-200.4D Manual Del Propietário página 2

INTRODUCTION
Congratulations and thank you for purchasing XAP Audio amplifiers, the logical choice in mobile audio
amplification. Your amplifiers have been designed and engineered with the highest quality components and top
of the line workmanship to help you reach the superior sound you are after.
To achieve optimal performance of your system, please take a few moments to read over this Owner's manual
or visit authorized dealer if needed before starting your installation.
FEATURES
XAP-1800.1D & XAP-2500.1D
● Stable into 1 ohm load
● High speed mosfet power supply
● 12dB/Oct, variable crossover
● Variable low pass filter
● Variable subsonic filter
● 6dB / 12dB selectable bass boost
● Remote control
● Compact design
XAP-200.4D
● Stable into 2 ohm stereo or 4 ohm mono;
● High speed mosfet power supply;
● 12dB/OCT, High pass filter;
● 12dB/OCT, Low pass filter;
● Band-pass capable;
● Surface mount technology;
● Double-sided printed circuit board.
XAP-200.4AB
● Advanced Double-sided and SMT technology with reliable and stable performance
● Adopted Classic Class-AB Design with Powerful Bass Effect and High Tone Clarity
● High and low pass adjustable design, with bass boost, preamp with LINE OUT
● Voltage range: 9-16V are able to work properly
● Multiple ways of protection (Thermal,short circuit)
● Full frequency for 2 Ohms minimum load, can bridge 4Ohms
FEATURES
Model
RMS power @ 4 ohm
RMS power @ 2 ohm
RMS power @ 1 ohm
RMS power @ 4 ohm Bridge
Amplifier Type
Minimum load impedance
Input Sensitivity
High Pass Filter
Low Pass Filter
Subsonic Filter
Bass Boost
Frequency Response
Signal to Noise Ratio
THD @ 4ohm
Damping Factor
Working voltage
Dimensions ( L inches )
6.3 W X 2.17 H inches
All features are subject to change in the continuing effort to improve the products without notice.
01
XAP-1800.1D XAP-2500.1D
600W x 1 800W x 1
1200W x 1 1500W x 1
1800W X 1 2500W X 1
- -
Class D Class D
1 ohm stable 1 ohm stable
6V - 0.2V 6V - 0.2V
- -
50Hz - 220Hz 50Hz - 220Hz
Off - 50Hz Off - 50Hz
1dB/6dB/12dB 1dB/6dB/12dB
20Hz -250Hz 10Hz -220Hz
≥90dB ≥85dB
≤0.1% ≤0.78%
>100 -
9V - 16V 9V - 16V
13.78 17.21
XAP-80.4AB
● Stable into 2 ohm stereo or 4 ohm mono.
● High speed mosfet power supply.
● 12dB/Oct, High pass filter.
● 12dB/Oct, Low pass filter.
● 6dB / 12dB selectable bass boost.
● Band-pass capable.
● Surface mount technology.
● Double-sided printed circuit board.
XAP-350.4D
● 4-Layer PCB designed with SMT technology, stable and
reliable performance
● Advanced Class-D design, bass is powerful and highs
are clear and natural.
● Adjustable LPF / HPF designed, with bass boost, have
Line out at Pre-amplifier.
● Voltage range :Proper functioning between 9 to 16 Volts
● Multiple ways of protection(Thermal,over-voltage,short
circuit)
● Full frequency is 2 ohm minimum load, can bridge 4ohm.
XAP-80.4AB XAP-200.4AB
80W x 4 220W x 4
120W x 4 320W x 4
- -
250W x 2 660W x 2
Class AB Class AB
2 ohm stable 2 ohm stable
6V-0.2V 6V-0.2V
20Hz - 5KHz 30Hz - 500Hz
50Hz - 500Hz 30Hz - 500Hz
- -
0dB/6dB/12dB 0dB - 6dB
20Hz - 20KHz 10Hz -20KHz
≥90dB ≥85dB
≤0.1% ≤0.13%
>100 -
9V - 16V 9V - 16V
13.78 17.21
ENGLISH
www.for-x.com.tr
XAP-200.4D XAP-350.4D
200W x 4 350W x 4
350W x 4 600W x 4
- -
750W x 2 1200W x 2
Class D Class D
2 ohm stable 2 ohm stable
6V-0.2V 6V-0.2V
15Hz - 600Hz 30Hz - 500Hz
150Hz - 6KHz(x10)
50Hz - 4KHz 30Hz - 500Hz
500Hz - 2KHz(x10)
- -
- 0dB - 6dB
20Hz -20KHz 20Hz -20KHz
≥85dB ≥85dB
≤0.2% ≤0.1%
- -
9V - 16V 9V - 16V
11.73 13.78