Descargar Imprimir esta página

Würth VP 800 Traducción Del Manual De Instrucciones De Servicio Original página 8

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
GB
Please read and comply with these
instructions prior to the initial opera-
tion of your device.
Retain these instruction manual for
future reference or for subsequent pos-
sessors.
Safety warnings
Avoid any constrictions in the suction hose, e.g.
due to dirt accumulation, squeezing, bending or
stretching.
Check the suction hose each time before use.
Renew any leaking or damaged parts.
Keep the cooling air vents on the pump free and
clean.
The underlying surface of the drill stand must be
clean, firm, smooth, dry and without any holes.
For further safety regulations, see the operating
instructions for the drill stand.
Caution: The machine becomes hot after a long
period of use.
Always connect the core drill and the vacuum
pump to the same power outlet.
Do not carry out any changes or modifications to
the machine.
Should the machine have an operational fault, the
vacuum function will remain for a short time. The
cohesion is dependent upon the underlying sur-
face and seal retention. Stop working immediately
and remove the drill stand completely.
Use only original Würth parts and acces-
sories.
8
For your safety
In case you do not adhere to this instruction manual
and the safety instructions, this may result in dam-
ages on the device and cause dangerous situations
for the operator and other people. In case of trans-
port damage inform vendor immediately.
The pump is only to be used for the purpose of pump-
ing air and under no circomstances to be used with
any other gases. The pump must not be used for the
pumping of fluids, particles, solids or any other sub-
stance.
The pump is designed for air only. Water vapour
and other contaminants will be filtered out by
means of a water-separator.
Ambient air should not exceed 40° C.
WARNING - Prior to the first
start-up, it is definitely neces-
sary to read the Safety instruc-
tions!
Special safety warnings
WARNING
Do not pump flammable or explosive gases
or operate the unit in an atmosphere contan-
ing them.

Publicidad

loading

Este manual también es adecuado para:

5709 132 0