Progress Lighting Paso P250109 Serie Manual De Instalación página 8

Hanging the Fan
Before touching a screw driver thoroughly read
these instructions.
WARNING/CAUTION: Before installing fan,
turn off power at service panel and check all
visible screws and bolts for tightness.
Step 1. Remove the decorative canopy bottom
cover from the canopy by turning the cover
counter clockwise. (Fig. 9)
Step 2. Remove the hanger bracket from the
canopy by removing the 1 of 2 screws from the
bottom of the hanger bracket and loosening the
other one a half turn from the screw head. Next,
turn the canopy counter clockwise to removing
the hanger bracket from the canopy. (Fig. 9)
Step 3. Secure the hanger bracket to the ceiling
outlet box using screws and washers included
with your outlet box. (Fig. 10)
5.
Step 4. Secure the hanger bracket to the ceiling
outlet box using screws and washers included
with your outlet box. (Fig. 10)
Ceiling hanger
bracket
Figure 9
UL Listed
electrical
box
Hanger bracket
Ceiling
canopy
Mounting screws
(supplied with
electrical box)
Canopy
Figure 10
cover
Tab