ing the attachments. After
cleaning the cutting blade
and grinding plate, apply
cooking oil to the surface to
prevent rust.
• Before removing the grind-
ing attachment, make sure
the meat grinder is turned
off. Ensure the appliance is
correctly assembled before
connecting it to the power
socket.
• Press the On / Off button to
turn off the appliance.
• Do not operate the appliance
for more than 10 minutes con-
tinuously.
• Before you put the plug into
the wall outlet, make sure your
hands are dry.
• Not following warnings and
safe use instructions can void
the warranty and pose a risk of
serious injury.
• If the meat grinder's fasten-
ing ring becomes loose, stop
working and disconnect the
appliance from the power sup-
ply.
• If the retaining ring is not se-
curely attached, do not oper-
ate the appliance.
• SAVE THESE INSTRUC-
TIONS. THIS APPLIANCE
IS FOR HOUSEHOLD USE
ONLY.
Electrical requirements:
Make sure that the voltage indi-
cated on the nameplate corre-
sponds to that of your home elec-
trical mains. Alternating current
must be used, typically marked ~.
In accordance with European Directive 2012/19/EU and
Polish legislation regarding used electrical and electronic
goods, this appliance is marked with the symbol of the
crossed-out waste container. This marking indicates that
the appliance must not be disposed of together with oth-
er household waste after it has been used.
The user is obliged to hand it over to waste collection centre collect-
ing used electrical and electronic goods. The collectors, including
local collection points, shops and local authority departments pro-
vide recycling schemes.
Proper handling of used electrical and electronic goods helps avoid
environmental and health hazards resulting from the presence of
dangerous components and the inappropriate storage and process-
ing of such goods.
SPECIFICATION:
Model - MM 3011/MM 4011
Rated voltage - AC 220-240V ~ 50Hz
Rated power - 1000 W
FEATURES AND COMPONENTS
1. Release button
2. Motor
3. On/off/reverse control button
4. Accessory compartment
5. Pusher
6. Ingredients feeder tray
7. Feeding tube
8. Auger
9. Cutting blade
10. Grinding plate (coarse/medium/fine)
11. Screw on ring
12. Thick sausage attachment
13. Thin sausage attachment
14. Kebbe attachments : a/b
15. Sausage attachment
16. Shredders* (applies to model: MM 4011)
17. Shredding tube* (applies to model: MM 4011)
18. Carrying handle
11
EN