7 GENERAL INFORMATION AND WARNINGS
The purpose of this manual is to enable a complete understanding of the
operation, installation and maintenance of the appliance. The information and
warnings necessary for the correct installation and use of the appliance are
available, together with information about its features and possibilities, to enable
you to take full advantage of its potential.
BEFORE FIRST USE OF THE APPLIANCE, READ THE
INSTRUCTIONS IN THIS MANUAL CAREFULLY.
Keep this manual in a safe place for future reference.
If you sell or lend the appliance to someone else, provide this
manual to the new user.
THIS APPLIANCE IS FOR PROFESSIONAL USE ONLY. IT MUST
ONLY BE OPERATED BY QUALIFIED PERSONNEL.
Positioning and installation, as well as repairs or modifications, must always be
•
carried out by an AUTHORISED TECHNICIAN, in accordance with the
regulations in force in your country. The manufacturer will not be held
responsible for improper installation.
Improper installation, adjustment, servicing or maintenance of the appliance or
•
tampering with it may result in property damage or injury.
If your appliance has stopped working, call Technical Assistance
•
Service.
•
NEVER attempt to repair it yourself or ask unqualified or
unauthorised personnel to do so.
Use original spare parts. Doing otherwise will void the warranty.
•
Before performing maintenance operations, disconnect
•
the refrigerated cabinet from the power supply using the
disconnection device or main switch.
DO NOT use abrasive or corrosive products, acids,
•
solvents or chlorine-based detergents for cleaning, as they
may damage the appliance.
DO NOT store explosive substances such as aerosol cans with a
•
flammable propellant in this appliance.
Keep all ventilation openings in the appliance enclosure or any
•
structure in which it is housed free of obstructions.
DO NOT use mechanical devices or other means to accelerate the
•
defrosting process other than those recommended by the
manufacturer.
DO NOT use electrical appliances inside the food storage
•
compartments except types recommended by the manufacturer.
•
The A-weighted emission sound pressure level is less than 70dB (A).
If the power cable is damaged, it must be replaced by the manufacturer,
•
its after-sales service or similarly qualified personnel to avoid a hazard.
If you ever change a cable, never use one with a smaller cross-sectional
•
area.
The maximum load per shelf is 30 kg, evenly distributed across the
•
entire area.
20