TECshow NAVIGATOR SMART RDM Manual De Usuario página 5

3. Number buttons
•
In CHASE mode, press a number button and the
chase will be activated or inactivated.
•
In SCENE mode, press a number button and the
scene will be activated or inactivated.
•
In MOVEMENT mode, press a number button,
and the movement will be activated or inactivated.
4. Faders
•
Move a fader to adjust the DMX output value.
•
PAN/TILT wheels
•
Pan/Tilt wheels function differently in different
modes:
- In menus mode , PAN/TILT chose menus.
- In runing mode "wheel to pan/tilt"LED
flicker: If have FXITURE activated, PAN/
TILT wheels are to adjust the output val-
ues of PAN/TILT.
- In runing mode wheel to pan/tilt LED OFF:
- If have MOVEMENT activated, PAN/TILT
wheels are to adjust the MOVEMENT run-
ing parameters.
5. Patch fixtures and faders
•
Before using your Show Design 3, you need to
patch the DMX start address of fixtures and the fad-
ers channel position.
The default fixture patch setting is as below:
Page Fixture
1
2
3
4
A
5
6
7
8
Start Page
Address
1
27
53
79
B
105
131
157
183
Fixture Start
Address
9 209
10 235
11 261
12 287
13 313
14 339
15 365
16 391
Page Fixture Start Address
17
18
19
20
C
21
22
23
24
NAVIGATOR SMART RDM
417
443
469
495
-
-
-
-
P. 5
ENGLISH VERSION