Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions
Electrical connection
The appliance is fitted with a plug and must only
be connected to a properly installed earthed
socket. Only a qualified electrician who takes the
appropriate regulations into account may install
the socket or replace the connecting cable. If the
plug is no longer accessible following installation,
an all-pole isolating switch must be present on
the installation side with a contact gap of at least
3 mm. Contact protection must be ensured by the
installation.
Fitted units
The installation cabinet must not have a back
panel behind the appliance. Minimum installation
height: 850 mm.
Ventilation slots and intakes must not be covered.
Appliance in a wall-hanging unit - Fig. 1A
Appliance in a tall unit - Fig.1B
Installing the oven - Fig. 2
Note: Do not trap or kink the mains lead.
Do not install the appliance under the kitchen
worktop and make sure that it is not exposed to
possible spillage from containers on the surfaces
under which it is installed.
42
V.1
Publicidad
