pro user IBC7500B Modo De Empleo página 3

The IBC7500B Intelligent Battery Charger is an advanced battery charger manufactured for Pro-
User Electronics that will increase your battery's performance and prolong its life. The IBC7500B
Intelligent Battery Charger with Bluetooth functionality and the free app "Check & Charge" enables you
to check and charge your battery with your connected Bluetooth-enabled device. (iOS 8.0 or later, or
Android 4.4 or later and a mobile device with Bluetooth BLE Ver. 4.3 or later is needed to connect to
the charger).
We have taken numerous measures in quality control to ensure that your product arrives in top condition,
and will perform to your satisfaction.
Please carefully read and follow the safety and operating instructions. Not following these
instructions may result in a serious accident, including damaged property, serious or even fatal
injuries. If the device is passed on to another person, this manual must also be handed over with
it.
CAUTION: Please read this instruction manual carefully before installing and starting
up the device. Do not operate the device unless you have fully read and understood
all the provided information. If you are not confident working with 12V/24V DC
voltage or are unsure of what you are doing, consider to seek for professional help
e.g. a car garage or your vehicle´s manufacturer. Failure to observe these
instructions may cause an electrical shock, fatal or serious injury, material damage
or impair the function of the device.
Read your vehicle's owner's manual!
Some vehicle manufacturers may have special requirements before charging the vehicle´s battery.
(e.g. fuses that have to be removed or certain security demands).
Pro-User accepts no liability for direct or indirect damage caused by faulty connections, a usage of
damaged or altered products, a usage for purposes other than described and especially caused by failure
to follow these instructions.
NEVER CONNECT to unsuitable batteries (e.g. NiCd-batteries). Do not charge
batteries that are known to be broken. The battery charger is not designed as a jump
starter. Not following these instructions could cause serious personal injury or
material damage.
This unit has safeguards against overheating, reverse-polarity and short-circuit.
Despite this, it is highly recommended not to touch or connect the red to the black
clamp or to connect the charging cables in reverse polarity. This could cause
dangerous sparks and electric arcing. Only connect and disconnect the battery, when
the mains supply is disconnected.
For indoor use only: Do not use the unit close to open fire. Do not operate the unit
in explosive atmospheres, such as in the presence of flammable liquids, gases or
dust. Please stop using the device, if the unit is getting very hot, is smoking or is
showing any abnormal behaviour.
Pro-User Electronics is not liable for any direct or indirect damages or injuries caused by the use of
the device, especially caused by failure to follow these instructions.
Type of Batteries
This charger is intended to be used only on 12.8V Lithium batteries and 12V & 24V Lead Acid Batteries,
e.g. WET, Gel-, AGM- (including Calcium-) and VRLA-Batteries. Do not try to charge unsupported types of
batteries like NiCd or non-rechargeable batteries. Follow the recommendations of your battery´s
manufacturer.
INTRODUCTION
IMPORTANT SAFETY INSTRUCTIONS
3