Bravetti FP111B Manual Del Usuario página 4

OPERATING INSTRUCTIONS
Important:
The food processor has a
swivel head system. It cannot run unless
the swivel head is locked. The swivel
head cannot be opened unless the
On/Off knob is turned to the "Off"
position.
Using the Double Chopping Blade
Always disconnect unit from power
source before cleaning or changing
accessories.
Warning
: USE EXTREME CAUTION
WHEN HANDLING THE BLADES.
THEY ARE EXTREMELY SHARP.
ALWAYS remove the chopping blade
protective guards before using.
Do NOT operate continuously for more
than 20 seconds at one time.
The food processor may be used with
one blade or two blades, depending on
type of food, finer chopping results, or
speed of processing. (Fig. 8)
Spindle
Double Main Blade
Blade
Fig. 8
1. To open the food processor, ensure
that the speed control dial is in the
"Off" position and press the swivel
head release button. (Fig. 9)
Fig. 9
2. To use with a double blade, carefully
slip the first blade
onto the spindle.
Hold this blade by
the base. Hold
second blade from
top grip and place
second blade on
top of first. Turn
second blade
clockwise to lock Fig. 10
into position. (Fig. 10)
3. Then place the blade assembly onto
the shaft of the processor bowl.
Always hold the chopping blade
assembly by the top of the spindle.
4. Place ingredients to be processed in
the bowl.
5. Place the processor lid onto the bowl
with lip inside of the notch on the food
processor body. Rotate the swivel
head and press to lock into position.
Insert the food pusher into the feeder
tube.
6. Plug the processor into a wall outlet.
7. Turn the speed control dial to the
desired speed setting.
Note
: The food processor unit will not
operate if the swivel head is not locked
securely.
8. Keep hands and utensils away from
the cutting blades while chopping
food to reduce the risk of severe
injury to persons or damage to the
food processor. A scraper may be
used, but ONLY when the food
processor is NOT running and has
been unplugged. Never feed food by
hand. Always use the food pusher.
(Fig. 11)
Fig. 11
9. When finished processing the
ingredients, turn the speed control
dial to the "Off" position and press
the swivel head release button. The
swivel head will automatically turn to
allow you to remove the bowl lid.
10. Remove the chopping blade(s) first
before removing the processed food.
FOR SAFETY, ALWAYS USE THE
FOOD PUSHER WHEN PUTTING
FOOD INTO THE THE FEEDER TUBE.
NEVER FEED BY HAND.
5
OPERATING INSTRUCTIONS
Processing Examples With The Double Chopping Blade
The processing times indicated below are approximate and also depend on the quantity
of the food to be processed and the degree of fineness you require.
PRODUCT QUANTITY
Meat* 24.5 oz / 700 gr.
Onions 24.5 oz / 700 gr.
Nuts 21 oz / 600 gr.
Fish* 24.5 oz / 700 gr.
Cheese 24.5 oz / 700 gr.
Liquids (soups) 24.5 oz / 700 gr.
Carrots 24.5 oz / 700 gr.
Bread 4 slices
Apples 24.5 oz / 700 gr.
Parsley Max 4 bundles
* Remove all bones before processing.
** Always allow food to cool before placing in the bowl.
Hints & Tips for Chopping Blades
• The double chopping blade can be
used for chopping meat, fish,
vegetables, cheese, etc. setting the
speed to maximum.
• For finer chopping, increase the
length of time you process.
• For coarser chopping, use the pulse
button for a few seconds and monitor
food texture.
• Pre-cut larger pieces to make them fit
into the feeder tube. When chopping
hard foods (e.g. meat, cheese) cut
into 1-inch ( 2.4 cm) cubes.
Slicing, Shredding, Grating &
Julienne Blade Assembly
Caution
: Make sure that the unit is
unplugged from the power source and
the speed control dial is in the "OFF"
position. Press the swivel head
release button so that the swivel head
is in the unlocked position before
inserting or removing attachments.
Caution
: Do not operate the unit for
intervals longer than 20 seconds. If
longer chopping or mixing is required,
run for 20 seconds, allow the motor to
stop and run again for another 20
seconds.
OPERATION TIMES
RECOMMENDED
Used in 10 – 20 second
SPEED
intervals
Max. 15 - 30 seconds
5-6 15 - 30 seconds
8-Max. 15 - 30 seconds
1-8 15 - 30 seconds
1-8 15 - 30 seconds
1-8 20 seconds
6-8 40-50 seconds
6-8 40 - 50 seconds
8-Max. 10 - 30 seconds
Max. 10 seconds
1. Place the blade
:
of your choice on
the blade holder.
Insert the longer
tab on the side of
the blade holder
Fig. 12
first. (Fig. 12)
2. Press the other
end of the blade
until it clicks into
place. (Fig. 13)
3. Place the spindle
into the food
processor bowl.
4. Using the finger
holes in the blade
holder, fit it over
the spindle and
press firmly into
place as indicated.
(Fig. 14)
Warning: Use Extreme Caution When
Handling Blades. Blades Are Sharp.
5. Place the lid on the food processor
bowl, and lock the swivel head into
position.
6. Plug in the processor and select
desired speed on speed control dial.
6
Fig. 13
Fig. 14