Descargar Imprimir esta página

Pinnacle Climate Technologies MASTER MAC-20FOMNI Manual Del Usuario E Instrucciones De Operación página 2

Ventilador de alta velocidad

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING
WARNING
WARNING
WARNING
- Before operating always check fan for loose or
damaged parts. Inspect power cord for any dam-
age. Never use fan if any parts are
damaged or missing. Never use fan without safety
guards attached.
- Operate only on 120 volt 60 Hz (cycle) current with
a minimum of a 15 amp circuit.
12" Floor Fan
12F
24" Barrel Fan
24DCT
© 2021, Pinnacle Climate Technologies, Inc.
NEVER LEAVE A FAN UNATTENDED WHILE OPERATING OR WHILE
To Reduce The Risk Of Electric Shock, Do Not Expose To Water Or Rain.This unit
is designed for indoor use only.
Installation work and electrical wiring must be done by qualified
person(s) in accordance with all applicable codes and regulations.
When servicing or replacing a component requires the removal or
disconnection of a safety device, the safety device is to be reinstalled or
remounted as previously installed before operating this fan.
Use this fan only in the manner intended by the manufacturer. If you have any
questions, contact Customer Service at 800-641-6996.
20" Floor Fan
20F
30" Floor Fan
30BCT
CONNECTED TO A POWER SOURCE
- When used with an extension cord, use only a cord
of proper size (Amp rating), UL listed, and with
receptacle to accept three prong grounded plug
furnished on the fan's power cord. Always keep
power cord and extension cords away from heat,
oil, and sharp edges. Inspect cords periodically and
replace if damaged.
2
High Velocity Fan User's Manual
20" Omni Floor Fan
20FOMNI

Publicidad

loading

Este manual también es adecuado para:

Master mac-20fMaster mac-12fMaster mac-24dctMaster mac-30bct